Click for Waste oil centrifuge videos
The ”Pab 120gph Basic WVO Centrifuge Filtration Unit ”is the easiest and cost effective way to clean your oil. The “Waste Oil Centrifuge Unit” has the ability to polish your oil to less than 1 micron. Begin by filtering your oil to remove the larger particles. The unit has the capability of removing water by way of the temperature in the drum and from the centriuigal force of the rotor in the oil cleaning centrifuge. Heat your oil to 150 -170º F with the 1500 watt drum heater. There are no filters or filter bags to replace - simply clean out the rotor in the oil centrifuge when it is full. The 1/2 HP carbonator-mount gear pump delivers the hot WVO to the 2 GPM wvo centrifuge at 85 PSI for peak performance. The carbonator-mount pump and motor takes oil from the bottom of the barrel to ensure constant recirculation of oil through the centrifuge. When finished polishing the oil, empty your tank by way of gate valve. (Pump, hose, and nozzle not included in this kit.)
Included are: 55 gallon banded drum with welded fittings, 120 GPH centrifuge w/ inverted rotor, 1/2 HP motor with carbonator- mount gear pump (4.4 gpm), hydraulic hose and fittings, 1500 watt drum heater, 200 PSI pressure gauge, adjustable pressure relief valve, 1-8' electrical cord.
Waste oil centrifuges clean and dewater your oil to below .5 micron. Centrifuge WVO for driving on waste vegetable oil or use a waste oil centrifuge for waste motor oil as diesel fuel. Oil filtering is the most important part of using WVO or WMO as fuel. When you think of alternative fuels biodiesel, waste vegetable oil, and waste motor oil come to mind. When building a centrifuge filtration unit, you will need a gear pump and drum heater.
Visit our other sites for:
Heating Products: www.jmazecorp.com
Diesel Centrifuges: www.centrifugeoilfiltration.com