Click for Waste oil centrifuge videos
The ”Pab 65 gph Deluxe WVO Centrifuge Filtration Unit” is the easiest and cost effective way to clean your oil. The “Waste Oil Centrifuge Unit” has the ability to polish your oil to less than 1 micron. Begin by filtering your oil to remove the larger particles. The unit has the capability of removing water by way of the temperature in the drum and from the centrifugal force of the rotor in the oil cleaning centrifuge. Heat your oil to 150 -170º F with the 1500 watt drum heater. There are no filters or filter bags to replace - simply clean out the rotor in the oil centrifuge when it is full. The 1/3 HP carbonator-mount gear pump delivers the hot WVO to the 1+ GPM centrifuge at 85 PSI for peak performance. The carbonator-mount pump and motor takes oil from the bottom of the barrel to ensure constant recirculation of oil through the wvo centrifuge. When finished polishing the oil, empty your tank by way of the 1 HP transfer pump with hose and fuel nozzle.
Included are: 55 gallon banded drum with welded fittings, 65 GPH centrifuge, 1/3 HP motor with carbonator- mount gear pump (2.2 gpm), hydraulic hose and fittings, 1500 watt drum heater, 200 PSI pressure gauge, adjustable pressure relief valve, 2-8' electrical cords, 1 HP transfer pump, 12' fuel hose, and 3/4 fuel nozzle.
Centrifuge for wvo or waste oil centrifuges have the ability to filter oil to below .5 microns. For people driving on wvo diesel or motor oil as fuel oil cleaning centrifuges are hard to beat. An oil centrifuge will filter oil to below .5 microns while dewatering oil. If using vegetable oil as fuel or waste motor oil as diesel fuel oil cleaning centrifuges do the best job.
Visit our other sites for:
Heating Products: www.jmazecorp.com
Diesel Centrifuges: www.centrifugeoilfiltration.com