Click for waste oil centrifuge videos
Waste Oil Specifications:
Waste oil centrifuge comes with bracket, pressure gauge, 3/8" ball valve, 2 - 3/8" brass tees, 2 - 3/8" brass hose barbs, and 3/8" close nipple.
The flow rate capacity of the waste oil centrifuge is 2 GPM or 120 gallons per hour. The unique design of the nozzles located on the top of the rotor make this oil cleaning centrifuge an excellent choice for water removal - when shut down, it is impossible for any water or contaminants to leak into your clean oil. The oil centrifuge measures 6" in diameter by 9" tall. Rotor is capable of holding 26 oz. of contaminants. One 55 gallon drum of oil will take approximately 27 minutes to process. The viscosity is the critical part of this equation. Waste oil centrifuge generates at (85 PSI) a centrifugal force 2,000 times greater than gravity at 8800 RPM. You need to purchase a 1/2 HP motor with pump for oil centrifuge operation. The oil cleaning centrifuge will filter waste vegetable oil, filter waste motor oil, filter hydraulic oil, filter gear oil or dewater biodiesel. The centrifuge will remove magnesol with more than one pass necessary. At the end of the process, you can also remove glycerin, which requires no heating. More than one pass may be needed.You can build a wvo centrifuge filtration unit with this oil centrifuge.
For alternative fuels, waste vegetable oil (wvo), waste motor oil (wmo), and biodiesel seem to be the three most popular types. The waste oil centrifuge is an excellent oil cleaner. Centrifuge filtering can polish your oil to below .5 micron.
All internal centrifuge parts certified nickel plated to prevent rust and corrosion.
5 Year Warranty with guaranteed full factory service
Canada $42.00 All other countries $62.00
Visit our other sites for:
Heating Products: www.jmazecorp.com
Diesel Centrifuges: www.centrifugeoilfiltration.com