|
Click for oil centrifuge videos
Oil centrifuges are used in the alternative fuels market for cleaning wvo, wmo, and other biofuels. To make biodiesel you need to process vegetable oil or you can filter your waste vegetable oil or waste motor oil to below .5 micron by centrifuge filtering and use as fuel for your diesel run vehicle or equipment.
Specifications
The Dual 55 GPH Centrifuge ~ 1/2 HP Motor gives you the versatility of 110 GPH while processing two different drums at two different times. Each Centrifuges come with 200 PSI liquid filled pressure gauge, 1/4" ball valve, 2 - 1/4" brass tees, 2 - 1/4" brass hose barbs, and 1/4" close nipple.
The flow rate capacity of the centrifuge is .92 GPM or gallons per hour. Each centrifuge measures 4" in diameter by 6.5" tall. Rotor is capable of holding 10 oz. of contaminants. Two 55 gallon drums of WVO/WMO will take approximately 60 minutes to process. The viscosity is the critical part of this equation. Centrifuge generates at 85 PSI a centrifugal force 2,000 times greater than gravity at 7500 RPM. The centrifuge will clean WVO, used motor oil or biodiesel in the wash process. The centrifuge will remove magnesol with more than one pass necessary. At the end of the process, you can also remove glycerin, which requires no heating. More than one pass may be needed.
Carbonator Mount Pump, Rotary Gear, Spur, 1/2 HP, Voltage 115/230, ODP Motor Enclosure, Carbonator Motor Frame, 1725 Max RPM, 4.4 GPM Max, Max Operating PSI 100, Port Size 3/8 In, 400 Max SSU, GPM @ Freeflow 4.4, @ 40 PSI 3.8, @ 80 PSI 3.2, Max Temp 210 F, With Relief Valve, Pump Body Material Cast Iron, Color Black, Steel Gears, Viton Mechanical Seal, Viton O-Ring, Steel Shaft Material. Power cord not included.
All internal centrifuge parts certified nickel plated to prevent rust and corrosion.
5 Year Warranty with guaranteed full factory service
FREE SHIPPING IN U.S.
INTERNATIONAL SHIPPING
Canada and Mexico $89 All other countries $149
|
