Oil Centrifuge / Motor Package - Dual 65gph [PAB-60MX2]

Click for oil centrifuge videos

When you think of alternative fuels biodiesel, waste vegetable oil, and waste motor oil come to mind. Oil filtering is the most important part of using wvo or wmo as fuel. Oil centrifuges clean and dewater your oil to below .5 micron. When building a filtration unit, you will need a gear pump and drum heater.

Specifications

The Dual 65 GPH Centrifuge ~ 1/2 HP Motor gives you the versatility of 120 GPH while processing two different drums at two different times. Centrifuges come with 200 PSI liquid filled pressure gauge, 1/4" ball valve, 2 - 1/4" brass tees, 2 - 1/4" brass hose barbs, and 1/4" close nipple.

The flow rate capacity of the each Oil Centrifuge is 1+GPM or 65 gallons per hour. The centrifuge measures 4" in diameter by 7 1/2" tall. Rotor is capable of holding 12 oz. of contaminants. Two 55 gallon drums of WVO/WMO will take approximately 51 minutes to process. The viscosity is the critical part of this equation. Centrifuge generates (at 85 PSI) a centrifugal force 2,000 times greater than gravity at 7500 RPM. The centrifuge will clean WVO, used motor oil or biodiesel in the wash process. The centrifuge will remove magnesol with more than one pass necessary. At the end of the process, you can also remove glycerin, which requires no heating. More than one pass may be needed.

Carbonator Mount Pump, Rotary Gear, Spur, 1/2 HP, Voltage 115/230, ODP Motor Enclosure, Carbonator Motor Frame, 1725 Max RPM, 4.4 GPM Max, Max Operating PSI 100, Port Size 3/8 In, 400 Max SSU, GPM @ Freeflow 4.4, @ 40 PSI 3.8, @ 80 PSI 3.2, With Relief Valve, Pump Body Material Cast Iron, Color Black, Steel Gears, Viton Mechanical Seal, Viton O-Ring, Steel Shaft Material. Power cord not included.

 All internal centrifuge parts certified nickel plated to prevent rust and corrosion.

Canada and Mexico  $89     All other countries $149