Click for Waste oil centrifuge videos
The 108 GPH WVO Centrifuge Wall Unit is compact. The waste oil centrifuge, bypass valve, pressure release valve and motor/pump are all mounted on a HDPE backboard. The wall unit eliminates the need for drilling holes or welding your drum, as the supply hose is just lowered to the drum bottom. This unit can be unpacked from the box and hung on the wall above your drum, completely assembled. You are ready to process.
The “Oil Cleaning Centrifuge Unit” has the ability to polish your oil to less than 1 micron. Begin by filtering your oil to remove the larger particles. The unit has the capability of removing water by way of the temperature in the drum and from the centrifugal force of the rotor in the oil centrifuge. Heat your oil to 150 -170º F with the 1500 watt drum heater. There are no filters or filter bags to replace - simply clean out the rotor in the wvo centrifuge when it is full. The 1/2 HP Oberdorfer carbonator-mount gear pump delivers the hot WVO to the 1.8 GPM centrifuge at 85 PSI for peak performance. The carbonator-mount pump and motor takes oil from the bottom of the barrel to ensure constant recirculation of oil through the waste oil centrifuge.
Included are: 108 GPH oil centrifuge w/ inverted rotor, 1/2 HP motor with Oberdorfer carbonator- mount gear pump (4.4 gpm), Heavy Duty 1500 watt drum heater, 200 PSI pressure gauge, adjustable pressure relief valve,all fittings and hoses already mounted, 1-8' electrical cord. (Motor wiring necessary).
Cleaning used motor oil centrifuge will allow you to use waste motor oil as diesel fuel. WVO centrifuge will filter your vegetable oil as fuel when turning your vehicle into a grease car. Oil cleaning centrifuges will allow you to run on many types of oils including transmission fluid. . Waste vegetable oil and waste motor oil are becoming alternative fuels.
Visit our other sites for:
Heating Products: www.jmazecorp.com
Diesel Centrifuges: www.centrifugeoilfiltration.com