Click for WVO centrifuge videos
WVO Centrifuge Specifications:
WVO Centrifuge comes with bracket, pressure gauge, 1/4" ball valve, 2 - 1/4" brass tees, 2 - 1/4" brass hose barbs, and 1/4" close nipple.
The flow rate capacity of the WVO centrifuge is .93 GPM or 55 gallons per hour. The wvo centrifuge measures 4" in diameter by 6.5" tall. Rotor is capable of holding 10.5 oz. of contaminants. One 55 gallon drum of WVO will take approximately 60 minutes to process. The viscosity is the critical part of this equation. WVO centrifuge generates at 85 PSI a centrifugal force 2,000 times greater than gravity at 7500 RPM. You need to purchase a 1/3HP motor with pump for wvo centrifuge operation. The centrifuge for wvo will filter WMO, filter hydraulic oil, filter gear oil or dewater biodiesel. The waste oil centrifuge will remove magnesol with more than one pass necessary. At the end of the process, you can also remove glycerin, which requires no heating. More than one pass may be needed. You can build a wvo filtration system with this unit.
Centrifuge WVO for driving on waste vegetable oil or use a waste oil centrifuge for waste motor oil as diesel fuel. When you think of alternative fuels biodiesel, waste vegetable oil, and waste motor oil come to mind. Oil filtering is the most important part of using WVO or WMO as fuel. Oil centrifuges clean and dewater your oil to below .5 micron. When building a centrifuge filtration unit, you will need a gear pump and drum heater.
All internal centrifuge parts certified nickel plated to prevent rust and corrosion.
5 Year Warranty with guaranteed full factory service. See full waranty information.
Visit our other sites for:
Heating Products: www.jmazecorp.com
Diesel Centrifuges: www.centrifugeoilfiltration.com
Alternative Fuels: www.centrifugeforwvo.com/