|
Click for oil centrifuge videos
Oil centrifuges are used in the alternative fuels market for cleaning WVO, WMO, and other biofuels. To make biodiesel you need to process vegetable oil or you can filter your waste vegetable oil or waste motor oil to below .5 micron by centrifuge filtering and use as fuel for your diesel run vehicle or equipment.
SPECIFICATIONS:
Centrifuge comes with pressure gauge, 1/4" ball valve, 2 - 1/4" brass tees, 2 - 1/4" brass hose barbs, and 1/4" close nipple.
The flow rate capacity of the wvo centrifuge is .93 GPM or 55 gallons per hour. The centrifuge measures 4" in diameter by 6.5" tall. Rotor is capable of holding 10.5 oz. of contaminants. One 55 gallon drum of WVO will take approximately 60 minutes to process. The viscosity is the critical part of this equation. Centrifuge generates at 85 PSI a centrifugal force 2,000 times greater than gravity at 7500 RPM. You need to purchase a 1/3HP motor with pump for centrifuge operation. The centrifuge will filter wvo, filter wmo, filter hydraulic oil, filter gear oil or dewater biodiesel. The centrifuge will remove magnesol with more than one pass necessary. At the end of the process, you can also remove glycerin, which requires no heating. More than one pass may be needed.You can build a wvo filtration system with this unit.
All internal centrifuge parts certified nickel plated to prevent rust and corrosion.
5 Year Warranty with guaranteed full factory service
FREE SHIPPING IN U.S.
INTERNATIONAL SHIPPING
Canada and Mexico $30 All other countries $48
|
