|
Click for oil centrifuge videos
When you think of alternative fuels biodiesel, waste vegetable oil, and waste motor oil come to mind. Oil filtering is the most important part of using WVO or WMO as fuel. Oil centrifuges clean and dewater your oil to below .5 micron. When building a filtration unit, you will need a gear pump and drum heater.
Specifications:
The flow rate capacity of the wvo centrifuge is 1GPM or 60 gallons per hour. The centrifuge measures 4" in diameter by 7 1/2" tall. Rotor is capable of holding 12 oz. of contaminants. One 55 gallon drum of WVO will take approximately 55 minutes to process. The viscosity is the critical part of this equation. Centrifuge generates (at 85 PSI) a centrifugal force 2,000 times greater than gravity at 7500 RPM. You need to purchase a 1/3HP motor with pump for centrifuge operation. The centrifuge will filter wvo, filter wmo, filter hydraulic oil, filter gear oil or dewater biodiesel. The centrifuge will remove magnesol with more than one pass necessary. At the end of the process, you can also remove glycerin, which requires no heating. More than one pass may be needed.You can build a wvo filtration unit with this centrifuge.
All internal centrifuge parts certified nickel plated to prevent rust and corrosion.
5 Year Warranty with guaranteed full factory service
FREE SHIPPING IN U.S.
INTERNATIONAL SHIPPING
Canada and Mexico $30 All other countries $48
|
