Oil Centrifuge 150 Gph Brass
The flow rate capacity of the waste oil centrifuge is 2.5 GPM or 150 gallons per hour.
The centrifuge measures 6.5" in diameter by 10.5" tall.
Rotor is capable of holding 42 oz. of contaminants.
One 55 gallon drum of WVO will take approximately 20 minutes to process. The viscosity is the critical part of this equation. Centrifuge generates (at 85 PSI) a centrifugal force 2,000 times greater than gravity at 6400 RPM. You need to purchase a 1/2 HP motor with pump for centrifuge operation. The centrifuge will filter wvo, filter wmo, filter hydraulic oil, filter gear oil or dewater biodiesel. The centrifuge will remove magnesol with more than one pass necessary. At the end of the process, you can also remove glycerin, which requires no heating. More than one pass may be needed.You can build a wvo filtration unit with this centrifuge. In alternative fuels, the waste oil centrifuge is the best filter unit for waste vegetable oil, waste motor oil, gear oil, lube oil, or transmission fluid. Centrifuge filtering can clean your oil to below .5 micron and dewater your oil. Oil centrifuges need a gear pump for operation and a drum heater for thinning the oil.
All internal centrifuge parts certified nickel plated to prevent rust and corrosion.
Every product is warranted to the original purchaser to be free of defects in material and workmanship for a period of five years. Bushings and shaft wear are not covered under this warranty.
International orders incur additional shipping charges.