OIL FILTERING MADE SIMPLE

Oil Centrifuge 55 Gph Brass and Bracket

$195.99

The flow rate capacity of the waste oil centrifuge is .93 GPM or 55 gallons per hour.

The oil centrifuge measures 4" in diameter by 6.5" tall.

Rotor is capable of holding 10.5 oz. of contaminants .

One 55 gallon drum of oil will take approximately 60 minutes to process. The viscosity is the critical part of this equation. Oil entrifuge generates at 85 PSI a centrifugal force 2,000 times greater than gravity at 7500 RPM. You need to purchase a 1/3HP motor with pump for centrifuge operation. The centrifuge will filter wvo, filter wmo, filter hydraulic oil, filter gear oil or dewater biodiesel. The centrifuge will remove magnesol with more than one pass necessary. At the end of the process, you can also remove glycerin, which requires no heating. More than one pass may be needed.You can build a wvo filtration system with this unit. When you think of alternative fuels biodiesel, waste vegetable oil, and waste motor oil come to mind. Oil filtering is the most important part of using WVO or WMO as fuel. Waste oil centrifuges clean and dewater your oil to below .5 micron. When building a filtration unit, you will need a gear pump and drum heater.

All internal centrifuge parts certified nickel plated to prevent rust and corrosion.

Every product is warranted to the original purchaser to be free of defects in material and workmanship for a period of five years.  Bushings and shaft wear are not covered under this warranty.

International orders incur additional shipping charges.

$19.99
SKU:
55BB waste oil centrifuge
Title:
Oil Centrifuge 55 Gph Brass and Bracket
Status:
Active
Stock: 
1000.00