OIL FILTERING MADE SIMPLE

Oil Centrifuge/Motor Package 300 Gph

$1,999.99

The flow rate capacity of the oil centrifuge is 5 GPM or 300 gallons per hour. The oil cleaning centrifuge measures13.5" in diameter by 18.5" tall. Rotor is capable of holding 202 oz. of contaminants. Waste oil centrifuge generates a centrifugal force 2,000 times greater than gravity at 4500 RPM. . The centrifuge for WVO will clean used motor oil or biodiesel in the wash process. The oil centrifuge will remove magnesol with more than one pass necessary. At the end of the process, you can also remove glycerin, which requires no heating. More than one pass may be needed.

Close Coupled Pump, Rotary Gear, 1 HP, Voltage 115/230, ODP Motor Enclosure,Close Coupled Motor Frame, 1725 Max RPM, 12 GPM Max, Max Operating PSI 100, Port Size 3/4 In, 400 Max SSU, Max Temp 210 F, With Relief Valve, Pump Body Material Brass, Steel Gears, Viton Mechanical Seal, Viton O-Ring, Steel Shaft Material. Power cord not included.1yr. warranty on motor/pump.

WVO centrifuge has the ability to clean your oil to below .5 micron while dewatering.   With a waste oil centrifuge, gear pump, and drum heater you can build a centrifuge filtration unit.  Oil filtering has never been so simple. Centrifuge oil cleaning filters oil better than house filters or filter bag setups.

International orders incur additional shipping charges.

$259.99
SKU:
300M/P centrifuge filter
Title:
Oil Centrifuge/Motor Package 300 Gph
Status:
Active
Stock: 
1000.00