Oil Centrifuge/Motor Package 55 Ggph
Waste oil centrifuge comes with 200 PSI liquid filled pressure gauge, 1/4" ball valve, 2 - 1/4" brass tees, 2 - 1/4" brass hose barbs, and 1/4" close nipple.
The flow rate capacity of the WVO centrifuge is .92 GPM or 55 gallons per hour. The oil cleaning centrifuge measures 4" in diameter by 6.5" tall. Rotor is capable of holding 10 oz. of contaminants. One 55 gallon drum of WVO/WMO will take approximately 55 minutes to process. The viscosity is the critical part of this equation. Waste oil centrifuge generates at 85 PSI a centrifugal force 2,000 times greater than gravity at 7500 RPM. The centrifuge for WVO will clean used motor oil or biodiesel in the wash process. The waste oil centrifuge will remove magnesol with more than one pass necessary. At the end of the process, you can also remove glycerin, which requires no heating. More than one pass may be needed.
Carbonator Mount Pump, Rotary Gear, Spur, 1/3 HP, Voltage 115/230, ODP Motor Enclosure, Carbonator Motor Frame, 1725 Max RPM, 2.2 GPM Max, Max Operating PSI 100, Port Size 1/4 In, 400 Max SSU, GPM @ Freeflow 2.2, @ 40 PSI 1.9, @ 80 PSI 1.5, Max Temp 210 F, With Relief Valve, Pump Body Material Cast Iron, Color Black, Steel Gears, Viton Mechanical Seal, Viton O-Ring, Steel Shaft Material. Power cord not included.
All internal centrifuge parts certified nickel plated to prevent rust and corrosion.
International orders incur additional shipping charges.