Oil Centrifuge/Motor Package Dual 55 Gph
The Dual 55 GPH waste oil centrifuge ~ 1/2 HP Motor gives you the versatility of 110 GPH while processing two different drums at two different times. Each WVO centrifuge come with 200 PSI liquid filled pressure gauge, 1/4" ball valve, 2 - 1/4" brass tees, 2 - 1/4" brass hose barbs, and 1/4" close nipple.
The flow rate capacity of the oil cleaning centrifuge is .92 GPM or gallons per hour. Each oil centrifuge measures 4" in diameter by 6.5" tall. Rotor is capable of holding 10 oz. of contaminants. Two 55 gallon drums of WVO/WMO will take approximately 60 minutes to process. The viscosity is the critical part of this equation. Waste oil centrifuge generates at 85 PSI a centrifugal force 2,000 times greater than gravity at 7500 RPM. The centrifuge for WVO will also clean used motor oil or biodiesel in the wash process. The centrifuge will remove magnesol with more than one pass necessary. At the end of the process, you can also remove glycerin, which requires no heating. More than one pass may be needed.
Carbonator Mount Pump, Rotary Gear, Spur, 1/2 HP, Voltage 115/230, ODP Motor Enclosure, Carbonator Motor Frame, 1725 Max RPM, 4.4 GPM Max, Max Operating PSI 100, Port Size 3/8 In, 400 Max SSU, GPM @ Freeflow 4.4, @ 40 PSI 3.8, @ 80 PSI 3.2, Max Temp 210 F, With Relief Valve, Pump Body Material Cast Iron, Color Black, Steel Gears, Viton Mechanical Seal, Viton O-Ring, Steel Shaft Material. Power cord not included. 1 yr.warranty motor and pump.
Cleaning used motor oil centrifuge will allow you to use waste motor oil as diesel fuel. WVO centrifuge will filter your vegetable oil as fuel when turning your vehicle into a grease car. Oil cleaning centrifuges will allow you to run on many types of oils including transmission fluid. . Waste vegetable oil and waste motor oil are becoming alternative fuels.
All internal centrifuge parts certified nickel plated to prevent rust and corrosion.
International orders incur additional shipping charges.