Oil Centrifuge/Motor Package150 Gph
Waste oil centrifuge comes with 200 PSI liquid filled pressure gauge, 3/8" ball valve, 2 - 3/8" brass tees, 2 - 3/8" brass hose barbs, and 3/8" close nipple. The flow rate capacity of the WVO centrifuge is 2.5 GPM or 150 gallons per hour. The oil cleaning centrifuge measures 6.5" in diameter by 10.5" tall. Rotor is capable of holding 42 oz. of contaminants. One 55 gallon drum of WVO/WMO will take approximately 20 minutes to process. The viscosity is the critical part of this equation. Waste oil centrifuge generates (at 85 PSI) a centrifugal force 2,000 times greater than gravity at 6400 RPM. . The centrifuge for WVO will clean used motor oil or biodiesel in the wash process. The oil centrifuge will remove magnesol with more than one pass necessary. At the end of the process, you can also remove glycerin, which requires no heating. More than one pass may be needed. Carbonator Mount Pump, Rotary Gear, Spur, 1/2 HP, Voltage 115/230, ODP Motor Enclosure, Carbonator Motor Frame, 1725 Max RPM, 4.4 GPM Max, Max Operating PSI 100, Port Size 3/8 In, 400 Max SSU, GPM @ Freeflow 4.4, @ 40 PSI 3.8, @ 80 PSI 3.2, Max Temp 210 F, With Relief Valve, Pump Body Material Cast Iron, Color Black, Steel Gears, Viton Mechanical Seal, Viton O-Ring, Steel Shaft Material. Power cord not included. 1yr. warranty on motor/pump. Centrifuge WVO for driving on waste vegetable oil or use a waste oil centrifuge for waste motor oil as diesel fuel. When you think of alternative fuels biodiesel, waste vegetable oil, and waste motor oil come to mind. Oil filtering is the most important part of using WVO or WMO as fuel. Oil centrifuges clean and dewater your oil to below .5 micron. When building a centrifuge filtration unit, you will need a gear pump and drum heater. All internal centrifuge parts certified nickel plated to prevent rust and corrosion.
Please request shipping quote.