Oil Centrifuge Filtration Wall Mount 120 Gph
The 120 GPH WVO Centrifuge Wall Unit is compact. The waste oil centrifuge, bypass valve, pressure release valve and motor/pump are all mounted on a HDPE backboard. The wall unit eliminates the need for drilling holes or welding your drum, as the supply hose is just lowered to the drum bottom. This unit can be unpacked from the box and hung on the wall above your drum, completely assembled. You are ready to process.
The ”Pab 120gph Oil Cleaning Centrifuge Filtration Unit”is the easiest and cost effective way to clean your oil. The “Waste Oil Centrifuge Unit” has the ability to polish your oil to less than 1 micron. Begin by filtering your oil to remove the larger particles. The unit has the capability of removing water by way of the temperature in the drum and from the centrifugal force of the rotor in the oil centrifuge. Heat your oil to 150 -170º F with the 1500 watt drum heater. There are no filters or filter bags to replace - simply clean out the rotor in the wvo centrifuge when it is full. The 1/2 HP Oberdorfer carbonator-mount gear pump delivers the hot WVO to the 2 GPM centrifuge at 85 PSI for peak performance. The carbonator-mount pump and motor takes oil from the bottom of the barrel to ensure constant recirculation of oil through the waste oil centrifuge.
Included are: 120 GPH oil centrifuge w/ inverted rotor, 1/2 HP motor with Oberdorfer carbonator- mount gear pump (4.4 gpm), 1500 watt drum heater, 200 PSI pressure gauge, adjustable pressure relief valve,all fittings and hoses already mounted, 1-8' electrical cord. ( Motor wiring necessary).
The waste oil centrifuge will filter waste oil to below .5 micron while dewatering. Oil cleaning centrifuges are making their mark in the alternative fuel market to either centrifuge waste vegetable oil or centrifuge waste motor oil for wvo diesel or to turn waste motor oil to diesel. If you're running on waste vegetable oil you can turn your vehicle into a grease car. Or you can use waste motor oil as diesel fuel.