(903)-563-0568
info@pabiodieselsupply.com
Description
Waste Oil Specifications: In alternative fuels, the oil centrifuge is the best filter unit for waste vegetable oil, waste motor oil, gear oil, lube oil, or transmission fluid. Centrifuge filtering can clean your oil to below .5 micron and dewater your oil. Oil centrifuges need a gear pump for operation and a drum heater for thinning the oil. This kit includes a 55 GPH WVO Centrifuge, 1/3HP motor with carbonator-mount gear pump with 1/4″ ports, heavy-duty 1200 watt drum heater, 200 PSI pressure gauge, 250 degree temperature probe, adjustable pressure relief valve, electric cord, 2 ball valves, and all fittings and hoses necessary to complete your unit. Also included are 3 poly bulkhead fittings with 1/2″ threading which enable you to connect a supply line, transfer valve and temperature probe to your drum without welding. The only additional item needed to process WVO/WMO/Biodiesel is a 55 gallon banded drum (not included). Waste oil cleaning centrifuges are making their mark in the alternative fuel market to either centrifuge waste vegetable oil or centrifuge waste motor oil for wvo diesel or to turn waste motor oil to diesel. The oil centrifuge will filter waste oil to below .5 micron while dewatering. If you’re running on waste vegetable oil you can turn your vehicle into a grease car. You can use waste motor oil as diesel fuel. With this kit you will be able to build your own WVO/WMO centrifuge filtration unit. All internal centrifuge parts certified nickel plated to prevent rust and corrosion. 5 Year Warranty with guaranteed full factory service. See full warranty information.
The 55 GPH Barrel Centrifuge Kit
This Barrel Centrifuge kit allows you to turn waste oil into valuable fuel for diesel engines. It converts worthless waste oil that nobody wants into valuable fuel so that you are prepared for any fuel shortage while saving money.
Our Barrel Centrifuge Kit has allowed people to recycle over 4,500,000+ gallons of oil worldwide, allowing thousands to become self-sufficient and save millions of dollars on fuel costs.
With This Complete Centrifuge Package, you will…
- Produce diesel fuel at home from waste oil so you are always self-sufficient
- Save thousands of dollars over time by producing your own fuel
- Enjoy a mess-free, low-maintenance process that keeps your hands clean
- Receive a full solution that includes everything you need to purify waste oil!
You don’t have to depend on others for fuel or be at the mercy of fluctuating fuel prices. You just need the right equipment to produce diesel fuel from waste oil yourself at home.
If you are ready to be self-sufficient and save money – it’s time to begin converting waste oil into diesel fuel. The 55 GPH Barrel Centrifuge Kit will get it done.
Begin producing fuel by clicking the below button “Add to Cart” now.
$1,100.00Add to cart
Everything You Need to Get Started
A Complete Centrifuge Solution
The 55 GPH Barrel Kit has everything needed to filter and purify waste oil – all you need is an oil drum! Our pump kit latches onto the barrel, feeding pressurized oil to the centrifuge. As the centrifuge is processing oil the dirt and containiments are removed, while water is separated through evaporation. Pure fuel-grade oil is all that’s left!
Black Diesel Info
& Resources
We offer a complete collection of videos and guides to help you begin producing fuel with this system. With our step-by-step guide, you’ll have everything you need to start producing your own Black Diesel. Our resources include tips and tricks from over 15 years of experience. We cover every aspect of the system, including how to make fuel from waste motor oil and waste vegetable oil, so you can get the best performance and value from your centrifuge.
Access to an
Online Community
Join a community of over 15,000 members who are all fuel-prepping and sharing their experiences. Learn from the collective knowledge of thousands of others using the same equipment, and gain insights to refine your setup and fuel production. Be part of a community where members discuss their black diesel experiences, ask questions, and offer tips on running fuel in different vehicles.
$1,100.00Add to cart
Unlimited Alternative Fuel Sources
DIY Diesel, also know as Black Diesel is produced from waste motor oil (WMO). This recycled used motor oil an be sourced from garages, repair shops, and even junkyards for free! You just have to bring the waste oil to your shop for purification, and it’s ready to be used as fuel!
Waste Vegetable Oil (WVO) is another source than can be used as fuel in older diesel engines. WVO & fryer oil can be found at restaurants, farms, and even food processing plants! The original diesel engine invented by Rudolf Diesel ran on peanut oil, and yours can too!
How the System Works
The 55 GPH Barrel Centrifuge Kit is fed by a 1/3 HP pump. The pump pulls dirty oil from the bottom of the container and sends it between 70 and 95 PSI to the barrel centrifuge. The pressurized oil exiting the rotor causes a spinning motion which creates upwards of 2,000 g-force. The clean oil drops out through the bottom of the centrifuge back into the oil drum. The dirty oil is cycled through the centrifuge multiple times before it is clean.
Simple | Cost Effective | Time Efficient
Heat & Purify
The 1200-watt drum band heater thins the oil reducing its viscosity so it can be more effectively cleaned. As the oil is heated to between 170°F and 220°F any water content is settled and evaporates from the top of the barrel. ProShot can be added to the fuel to emulsify the water, allowing the centrifuge rotor to capture it.
Separate Water | Extract Sludge
Enclosed Bowl Design for Maximum Efficiency
To operate the system a ball valve at the bottom of the barrel is opened. This allows the pump to pull oil from the barrel and send it to the centrifuge. A ball valve on top of the barrel is used to regulate the pressure, which controls the rpm of the centrifuge. A pressure relief valve is set to 100 PSI and bypasses the oil if the rotor clogs. This protects the centrifuge rotor from harm.
Heavy Duty Design | Highly Efficient
Electrical Efficiency
The Centrifuge Rotor is easy to clean and maintain. First, take off the clamp and cover to see the rotor. Use a wrench to remove the top nut, then take apart the three main pieces (cover, middle plate, and base). Remember how they fit together. Scrape out the built-up sludge, replace the paper filter, and clean the small jets with brake cleaner. Add a few drops of WD-40 to help it spin smoothly. When putting it back together, line up the arrows on all three pieces. In less than 10 minutes you are ready to clean oil again!
Low Cost | Fuel for Pennies
$1,100.00Add to cart
Your Success is Our Success31o We Guarantee It
Ultimate Risk-Free Guarantee
100% Guarantee you’ll love this centrifuge or your money back. No questions asked.
That’s right. Just send us an email of your receipt or call us and send the centrifuge back to us in 30 days. We’ll give you a full refund.
You should be so impressed with the Barrel Centrifuge Kit that you’ll want to tell all your friends and family that you now produce homemade diesel fuel. The rotor works wonders capturing sludge.
Ultimate Support for Success
We guarantee support. We know the DIY fuel journey can get confusing, with plenty of bumps and unforeseen turns…
That’s why if you have any questions or hang-ups on how to use the Barrel Centrifuge Kit, or need help with a set-up layout, you’ll be able to reach our centrifuge expert via email and receive a response within a 24-hour period.
We truly care about your success, and that’s why we’ll be there every step of the way.
$1,100.00Add to cart
Worldwide Shipping
We proudly offer worldwide shipping and have successfully delivered to customers across the globe! From Australia and New Zealand to the United Kingdom, South Africa, Israel, and more. Contact us directly for the best shipping rates, and start producing your own fuel with confidence, no matter where you are!
$1,100.00Add to cart
Our Customers Love Us!
⭐ ⭐ ⭐ ⭐ ⭐
PA Biodiesel were just great, new to this activity and had lots of question which Michael took the time to give detailed answers. This really helped me fine tune the requirements and my needs. I opted for the Ultimate force unit in the end and the gear looks good quality and robust, just what I was looking for. Waiting to finalize electrical atm and run our first batch.
Richard H.
Verified Customer
⭐ ⭐ ⭐ ⭐ ⭐
I had an issue with a factory defect. Pa. biodiesel took care of the issue way better than I expected. I will defiantly use them again in the future
Joel Vandiver
Verified Customer
⭐ ⭐ ⭐ ⭐ ⭐
I use my centrifuge particularly for cleaning old diesel from boats that don’t move and so there is usually a water problem and also a bug problem. I have found it best to add One Shot storage pro a diesel additive that separates out water in diesel and leaves it as an emulsion for a week then decant for a day and centrifuge. If I don’t decant, I often find a lot of water in the diesel and that is too much for the centrifuge to hold before needing emptying by draining.
I find the centrifuge much better than filters…
Robert Graham
Verified Customer
⭐ ⭐ ⭐ ⭐ ⭐
Excellent customer service from Michael, was a pleasure to talk too. Purchased their Ultimate Force centrifuge. After reviewing all other centrifuges on the market, the PA Biodiesel centrifuge was my top choice based on most thought out design, largest bowl, and ease of cleaning after use. With hands on experience now, I can confidently say it performs extremely well for filtering my waste engine oil and veggie oil. I am in Canada, shipping was fast, only had to pay taxes for Fedex duties no additional charges. I would highly recommend these centrifuges
Reid Nielsen
Verified Customer
$1,100.00Add to cart
Frequently Asked Questions
Does the Barrel Centrifuge Kit Remove Water?
The rotor will not capture the water unless it is emulsified with ProShot. Residual amounts of water will be removed by evaporation. This kit is designed for removing carbon, sludge, and other debris found in contaminated oil.
Is this all I need to produce fuel?
The Barrel Centrifuge Kit is a complete kit that includes everything you need to begin purifying waste oil. All you need is a drum full of oil. The pump kit will pull the oil from the bottom of the drum and feed it to the centrifuge. The cleaned oil gravity drains back into the container below it.
How Quickly Will I See Savings?
It only takes 275 gallons of waste oil to break even. Purifying 275 gallons of waste oil in the first week of purchasing the Barrel Centrifuge Kit pays for itself 100%.
How do I place an order?
Click “Add to Cart” with the button below and check out online! International clients may send us an email for the best shipping rate.
$1,100.00Add to cart
