The oil centrifuge has a flow rate capacity of .93 GPM or 55 gallons per hour.
The oil centrifuge measures 4″ in diameter by 6.5″ tall.
Rotor is capable of holding 10.5 oz. of contaminants.
One 55-gallon drum of waste oil will take approximately 60 minutes to process. The viscosity is the critical part of this equation. Oil cleaning centrifuge generates at 85 PSI a centrifugal force 2,000 times greater than gravity at 7500 RPM. You must purchase a 1/3HP motor with a waste oil centrifuge operation pump. The oil centrifuge will filter waste vegetable oil, filter waste motor oil, filter hydraulic oil, filter gear oil or dewater biodiesel, and waste vegetable oil dewatering.
Oil centrifuge filtering will remove magnesol with more than one pass necessary. At the end of the process, you can also remove glycerin, which requires no heating. More than one pass may be needed. You can build a wvo filtration system with this unit. The waste oil centrifuge is the best filter unit for waste vegetable oil, waste motor oil, gear oil, lube oil, or transmission fluid. Centrifuge filtering can clean your oil to below .5 micron and dewater your oil. Oil centrifuges need a gear pump for operation and a drum heater for thinning the oil. Centrifuge waste vegetable oil for wvo diesel. All internal centrifuge parts certified nickel plated to prevent rust and corrosion. Every product is warranted to the original purchaser to be free from defects in material and workmanship for a period of five years. Bushings and shaft wear are not covered under this warranty. International orders incur additional shipping charges.
(903)-563-0568
info@pabiodieselsupply.com
Reviews
There are no reviews yet